NVIDIA GeForce RTX 4060 Ti “AD106-350” GPU Pictured, Uses Samsung GDDR6 Dies
The AD106 Ada Lovelace GPU for NVIDIA's upcoming GeForce RTX 4060 Ti graphics card has been pictured.
In a picture leaked by MEGAsizeGPU, we get our very first look at the Ada Lovelace GPU that will be powering the NVIDIA GeForce RTX 4060 Ti graphics card. This chip in particular is the "AD106-350" die which was earlier reported to power the graphics card and now this leak more or less confirms this. The PCB also shows the use of Samsung GDDR6 dies which means that lower-tier cards will be making use of a different memory design than what's featured on the higher-end GDDR6X designs.
4060Ti pic.twitter.com/BVmYyj95g6
— MEGAsizeGPU (@Zed__Wang) April 28, 2023
The use of the AD106 GPU for the GeForce RTX 4060 Ti confirm that it is being made use of a lower-tier chip than the previous-gen. The RTX 3060 Ti featured the GA104 and a 256-bit bus interface but the RTX 4060 Ti is going to make use of the AD106 GPU and a 128-bit bus interface. The Samsung dies are also going to operate at lower speeds than the GDDR6X chips so even if NVIDIA uses the 18 Gbps modules, it will lead to just 288 GB/s bandwidth which will be lower than the 3060 Ti's 360 GB/s bandwidth.
The one advantage the card will have is a higher L2 cache besides the higher power efficiency. The 8 GB VRAM might be a bit troublesome to make the card attractive to gamers. There have been a large number of unoptimized PC ports over the past few years which don't run well on cards with lower VRAM and demand at least 10-12 GB VRAM buffer for an adequate gaming experience. How NVIDIA will market the 8 GB on the RTX 4060 Ti graphics card remains to be seen.
NVIDIA GeForce RTX 4060 Ti Specifications "Rumored":
The GeForce RTX 4060 Ti is expected to utilize the AD106-350-A1 GPU
Read more on wccftech.com
