Sons Of The Forest - 3D Printer Location And Craftable Items Guide

gamespot.com:

Sons of the Forest has numerous points-of-interest for you to check out. One, in particular, has a rather nifty device. Here's our Sons of the Forest 3D Printer guide to help you find this machine so you can craft new items.

To find the 3D Printer in Sons of the Forest, you'll need to bring out your GPS Device by pressing the «M» key. The screen will rotate depending on your character's orientation. As such, to make it simpler, let's say that you're at the helicopter crash site and the mountains are to the north. You should see two caves: one directly south of that area and one to the southeast. Likewise, there should be a green dot close to the southeast cave.

You'll want to head to that green dot (which can be seen in the image below). Once you're close enough, you'll see that the place is overgrown with weeds and vines. However, there should be another opening here. Enter it and you'll arrive at a dark corridor. At the end of the hallway, you'll stumble upon a rather cozy spot: a rest area that has the Sons of the Forest 3D Printer.

The 3D Printer in Sons of the Forest uses Printer Resin as a material. There are a couple of bottles near the helicopter crash site, a few more in the printing area, and others that are scattered all over the island. Just make sure you're always opening containers with yellow lids or checking shelves.

In any case, the idea here is that each craftable item costs a certain amount of resin. Once the printer is almost out of resin, you'll have to fill it up by using what you've gathered beforehand. Below, you'll see the items, as well as their costs and uses. You can switch to the other items by pressing the «R» key, and you may start the printing process by holding the «E» key.

Do take note